Bridgeport Knee Mill Ballscrew Upgrade

Description

High Performance Ballscrew Kit
Upgrade your Bridgeport series 1 style knee mill with this precision-rolled ballscrew kit. The screw and nut assemblies are made of hardened steel for durability and long life. This ballscrew kit will provide a load life expectancy of 50 million inches of travel at an operating load of 400 pounds. The many advantages in this design over other products on the market include:
• Accuracy of +/-.002" per foot
• Preloaded Ball Nuts- Each ball nut is preloaded to eliminate lost motion. This stiffness provides faster response from a control command, allows heavier cuts and climb milling thus increasing productivity.
• Easy-Access Lubrication: Lubrication of ball nuts made easy through 5/32" holes in the flanges. These holes provide for attachment of existing lube tubing.
Notes:
Available lengths for the X axis are: 36", 42", 48" and 54" (these refer to the table lengths).
•
The Y axis selections are: 9", 12", and 16".
•
T
he Y axis length to select is the travel distance and not the table width.
•
Please verify lengths/measurements before ordering as these cannot be returned.
Product
Order #
Price
Bridgeport Ballscrew Kit 9 x 36
999-1000-202
,508
Bridgeport Ballscrew Kit 9 x 42
999-1000-203
,544
Bridgeport Ballscrew Kit 9 x 48
999-1000-204
,560
Bridgeport Ballscrew Kit 12 x 36
999-1000-205
,513
Bridgeport Ballscrew Kit 12 x 42
999-1000-206
,549
Bridgeport Ballscrew Kit 12 x 48
999-1000-207
,566
Bridgeport Ballscrew Kit 12 x 54
999-1000-212
,964
Bridgeport Ballscrew Kit 16 x 36
999-1000-208
,524
Bridgeport Ballscrew Kit 16 x 42
999-1000-209
,560
Bridgeport Ballscrew Kit 16 x 48
999-1000-210
,577
Bridgeport Ballscrew Kit 16 x 54
999-1000-213
,058
Note:  Please allow 5-10 business days for Ballscrew Kits to ship.
____________________________________________________________________________________________
Additional
Floor Model Knee Mill Conversion Kits Available:
(Unless otherwise noted, the following kits ship within 2 weeks of order)
Bridgeport XY Kit
The Bridgeport XY CNC
retrofit kit includes the mechanical components needed to convert the X and Y axes of your manual Bridgeport, Jet, Enco or most any similar J-head type mill for CNC operation. All components are precision engineered. The kit includes (2) Size 42 motor mounting plates, (2) motor pulleys, (2) lead screw pulleys, (2) motor covers, (2) drive belts, and all required bolts and spacers. For use with NEMA 42 size motors (Order separately)
.
Product
Order #
Bridgeport XY Kit
999-1000-100
CNC Bridgeport Knee Conversion Kit
The Bridgeport Knee CNC retrofit kit
mechanical components needed to automate the knee of a manual Bridgeport, Jet, Enco or most any similar type milling machine for motorized control. All components are precision engineered. Kit includes a size NEMA 42 motor mounting plate, motor pulleys, lead screw pulley, motor cover, drive belt, and all required bolts. For use with NEMA 42 size motors.(order separately). For best results with the new larger pulley (3:1), we recommend the 42HT4000.
Product
Order #
CNC Bridgeport Knee Conversion Kit
999-1000-102
NEW Improved Design!
Bridgeport Quill Kit
The Bridgeport CNC Quill
retrofit kit includes the mechanical components needed to convert the Z axis of your manual Bridgeport or Enco mill for CNC operation. All components are precision engineered and include the hard anodized quill feed drive frame w/ size 34 motor mount, the ball screw and ball nut assembly, the motor and ball screw pulleys, the motor cover, all needed bolts and spacers. Ideally suited for use with the 34HT1275 motor
(Order separately).
Product
Order #
Bridgeport Quill Kit
999-1000-101
Variable Spindle Speed Kit, 2 and 3 HP
The Variable Spindle Speed kit includes the cabinet that mounts to the mill, a 2 or 3 HP VFD, emergency stop, variable speed control and electronic display as well as the necessary mounting hardware.
Product
Order #
2HP Variable Speed Spindle Controller,   LeGrande
999-6500-037
3 HP Variable Speed Spindle   Controller, LeGrande
999-6500-039
CNC Rack-Mount Control Systems for Full-Size Machines
A complete pre-engineered package to automate your full-size Bridgeport, Enco, or similar size knee mill. Just couple the motor shafts to your machine's drive screws, plug in the cables, turn on the power, and install the software. You can immediately jog the motors by pressing Ctrl-J, and clicking on the X+, X-, Y+, Y-, Z+, and Z- buttons! It's literally that easy! You can write simple part programs as well as use the built in wizards screens to generate programs for pockets and bolt hole circles. The drill holes can be simple down/up or with chip break cycles, chip clearing cycles etc... You can also use your favorite CAM program to generate complex 3D simultaneous surfacing machining tool paths. This same controller can also be used to automate a lathe. You would just use the TurnMaster Pro software. The 3 Axis version would also be able to control a tool turret. A tower orientation is available on request.
SYSTEM
·
DriveRack high performance power driver
·
Built-in
Motionet MN400
motion controller
·
Choice of motors (Choose between
42HT1700
,
34HT1275
, and
34HT750
)
·
The 2 axis models are typically for lathes and come standard with (1) 34HT1275 and (1) 34HT750 motors
·
The 3 axis models are for Mills and come standard with (2) 42HT1700 and (1) 34HT1275 motors
·
All motors come with prewired armoured cables and locking circular connectors
·
G-code control & graphical software (
MillMaster Pro
or
TurnMaster Pro
)
·
All cables & illustrated manuals
Product
Order #
2 axis Rack Mount System- MN400
999-6200-102
3 axis Rack Mount System - MN400
999-6200-103
4 axis Rack Mount System - MN400
999-6200-104
2 axis Rack Mount Microstepping   System- MN400
999-6200-112
3 axis Rack Mount Microstepping   System- MN400
999-6200-113
4 axis Rack Mount Microstepping   System- MN400
999-6200-114
Engineering Quality CNC Components and Systems Since 1985
Kennesaw, GA  30144