Fiber Optic Laser Photonic Electronic Applications Repair Kit Epoxy F162, 2.5gm

Description

Technical Product Bulletin
ELECTRICALLY INSULATING THERMALLY CONDUCTIVE EPOXY ADHESIVE
PRODUCT DESCRIPTION:
AA-BOND F162
is a thixotropic electrical insulating epoxy adhesive system with low vapor pressure and outgassing characteristics.
AA-BOND F162
was specifically developed for fiber optic, laser, photonic and electronic applications requiring excellent electrical insulation in combination with effective thermal dissipation from heat-producing components.
AA-BOND F162
is two-part epoxy compound develops strong, durable, stable, high impact thermally conductive bonds at room temperature, and adheres readily to itself, and to metals, many plastics, silica, steatite, alumina, sapphire and other ceramics, glass, and to many other materials.
AA-BOND F162
provides excellent resistance to salt solutions, mild acids and alkalis and many other chemicals including petroleum solvents, lubricating oils and alcohol.
PRODUCT DESCRIPTIONS:
Appearance
Red
Cure Type
Room Temperature or Heat cure
Benefits
·
Smooth paste
·
Fiber optic
·
Laser
·
Photonic and electronic applications
·
Good electrical insulation
Mix Ratio by weight
100:10 / Resin:Hardener
Substrates
Metals, Many plastics, Glass, and other materials
Operating Temperature
-60 to 120 °C
Typical Applications
ALL types of fiber-optic connectors as well as LED displays, lenses and other optical components.
UNCURED PROPERTIES:
Viscosity @ 25 °C  cps
54,000
cP
@Temperature 77.0 °F, 25.0 °C
Thixotropic Index
2.0
Specific Gravity, mixed,  g/cc
2.29
Solids Content
100 %
CURED PROPERTIES:
Thermal Conductivity
6.09 BTU-in/hr-ft²-°F
Hardness, Shore D
88
CURE SCHEDULE:
2 to 4 hours
@ 65°C
24 Hours
@ 25°C
ELECTRICAL PROPERTIES:
Volume Resistivity
2.10e+15
ohm-cm
Dielectric Constant
5.9
@Frequency 1000 Hz
Dielectric Strength
410
kV/in
Dissipation Factor
0
.010
@Frequency 1000 Hz
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1)
Carefully clean and dry all surfaces to be bonded.
2)
Apply
AA-BOND F162
completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3)
Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4)
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY:
This epoxy can be supplied in various different packages.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application