Gorilla Epoxy Stick Putty 2 Ounce Waterproof Permanent Bond 10 Min Set, 2-Pack

Description

Ebay Template
Home
About
feedback
contact
Fast Shipping
Great Prices
Easy Returns
Best Support
Gorilla Epoxy Stick Putty 2 Ounce Waterproof Permanent Bond 10 Min Set, 2-Pack
PRODUCT ID:
N-GG-4242502-2PK
Item features
Quantity: 2-Pack
Gorilla All Purpose Epoxy Stick
2 Oz (56.7g)
Epoxy putty - hand-mixable and easy to use
Sets in just 10 minutes
Incredibly strong and versatile - 1550 PSI
Permanent bond on metal, concrete, ceramic, PVC, fiberglass, stone, glass, most plastics,
wood and more!
Waterproof, non-rusting
Dries Gray
Once cured, it can be drilled, sanded, and painted
For indoor/outdoor use
Can be used as gap filling
Great for auto, plumbing, household repairs and more!
Item Details
Gorilla All Purpose Epoxy Stick is an incredibly strong and versatile epoxy putty. The hand-mixable, easy to use Epoxy Stick sets in just 10 minutes and works on most surfaces. Gorilla All Purpose Epoxy Stick is waterproof, non-rusting and once cured, it can be drilled, sanded, and painted. It’s great for auto, plumbing, household repairs and more!
Incredibly strong - 1550 PSI and dries a gray color. Forms a permanent bond on metal, plastic, concrete, ceramic, PVC, fiberglass, stone, glass, wood and more! Withstands temperatures up to 300 degrees F. Application temperature - 40 -104 degrees fahrenheit and Service temperature - -20-300 degrees fahrenheit. The cure mechanism is a 2 part reaction that requires mixing. Can be used in/outdoors and as a gap filling. NSF/ANSI 61 certified drinking water safe.
Note: Bonded wood materials should not be submerged or soaked in water. Not for exhaust systems. For temporary repair of drainage pipes or low pressure pipes only. Not recommended for use on polyethylene or polypropylene plastics.
Directions:
Wear disposable gloves to avoid skin contact. Remove foil sticker & film wrapper and set aside for storage of any unused putty. Wash hands thoroughly after handling.
1. For best results, roughen smooth surfaces with sandpaper before applying putty. All surfaces should be clean and free of grease, oil, or other loose particles.
2. Cut off desired amount of putty.
3. Mix by kneading the putty to a uniform color (approx. 30-60 seconds). Putty will not harden completely if not mixed thoroughly.
4. Apply putty by firmly pressing to the project surface within 5 minutes of mixing.
SET TIME: 10 minutes
CURE TIME: 24 hours
CLEAN UP: Remove any excess material before hardening.
USAGE: Use in a well-ventilated area. Paintable after 1 hour. Wear dust mask and protective eyewear when sanding or drilling cured product.
© 2017 Fresh Colony, All Rights Reserved